Project code : KL-604
Available : Ready Project | DIY Kit | Online Training
Kits Delivery : 5-7 Working days
Training Duration: 60 Hours (3 members / Project group)
temperature meter uses the precision micro power centigrade sensor IC
LM35. The output voltage of the IC is linearly equal to +10Mv per
degree centigrade. The temperature level is displayed through LED
The circuit uses the precision temperature IC LM35. This three pin transistor like IC give output linearly equal to +10mV per degree rise in temperature. It can measure temperature between -4 degree to +110 degree centigrade. Its related type LM34 is Fahrenheit sensor and its output is equal to -10mV per degree Fahrenheit. Output of IC1 is directly given into the input of the display driver IC LM3914. It is a monolithic integrated circuit with 10 active low outputs that can drive 10 LEDs directly without a current limiting resistor.
The internal circuitry of the IC adjusts the current passing through the LEDs. The input of LM 3914 is very sensitive and its outputs 18 – 10 sinks current one by one as the input receives an increment of 125 milli volts. Here only 6 outputs are used to drive 6 LEDs. More LEDs can be included in the remaining outputs if required. As the IC LM35 senses temperature rise, LEDs one to six light up. If the sensitivity is not high, VR2 can be omitted. Then output of IC LM35 should be directly connected to the input of IC LM3914.
LIST OF COMPONENTS:
9 volt Battery
Temperature sensor LM35
Display driver IC LM3914
Resistors 1/4 watt
LEDs – Red,Green,Yellow
|DIY Project Kit includes :|
|READY Project Kit includes :|
|Online Project Training :|
FILL THE FORM AND WE WILL SEND THE DETAILS REGARDING PROJECT ORDER & PAYMENT.