DIY PROJECT KITS






[1] Plain PCB board:- This PCB board is designed such way that it comprises two separate portion in a board. A Printed circuit area & General purpose board(GPB) area.

Printed Circuit Area: which contains the printed circuit area, It is specially designed for those components and circuit which needs high precision in soldering and good skill in wiring a circuit. This portion contains Regulated Power supply and filters circuit, MCU circuit with RESET and Crystal oscillator, RS232 Serial COM port, LCD display circuit. This Printed portion offers an easy way of soldering each & every component to PCB.

GPB Area: This portion does not contain any wiring printed at all, and it allows students & learners to design the board for each component wiring. It needs to design circuit wiring/soldering by user it self, so zero board(GPB) provides more involvement of work than a fully designed PCB.

[2] Assembled and tested PCB board:  This is provided as a reference board for the students and learners, It is completely developed plain PCB board with circuit design and soldered the all components in Printed area and GPB area in a board. As it makes connections on GPB or PCB boards that are used if difficulties arise while managing the electronic circuit design, wiring and testing of the project using plain PCB board. Students/learners can also check voltage readings across the components, output readings or output status (light indication and motor rotation), etc. for references and accurate output results.

[3]Hardware Materials: The hardware materials include an one set of fully assembled and tested PCB and a plain PCB board as described above, and a set of solder-able components along with a set of detachable components, tool kit, and consumables.

[4]Hardcopy Documentation: The hardcopy contents include project assembly procedure, bill of material, circuit diagram, circuit voltage parameters for testing, and one components’ layout PCB diagram.

[5]Softcopy Documentation: The softcopy contents include a brief project documentation which includes a brief project report, a power point presentation seminar, abstract, block-diagram, circuit-diagram and simulation circuit with explanation and source code, all components datasheet, a brief explanation on practical electronics, component testing, and functioning, soldering techniques, project output, , and assembly procedure of the project kit.



  1. One set of complete soldered & assembled printed circuit boards (PCBs) of Project.

  2. One set of unassembled printed circuit board(PCBs) without soldered the components in PCB of Project.

  3. All major-minor components set of project

  4. One set of pre-programmed Micro-controller

  5. Power point presentation of project

  6. Brief project report in word file

  7. Datasheet of all components

  8. All software set up required for project

  9. Project circuit diagram & PCB design file

  10. Simulation circuit and code of project

  11. Programme code & Hex file

  12. A Brief procedure on project assembling

  13. A Brief procedure on soldering the components in PCB

  14. A Brief explanation on project testing & working

  15. Micro-controller circuit with PIN explanation

  16. Details on all Major-Minor components of project

  17. Programming Tutorial on interfacing of various sensors and modules to the microcontroller processor.